Checking your modem settings - Windows Vista
Our 0845 and 0808 dial-up products were withdrawn from service in January 2015. To find out more about this, or if you have any questions please see our Dial closure FAQ.
Click on Start and then Control Panel. Ensure that you are using the Classic View.
Double click Phone and Modem Options.
The Dialing Rules screen will appear. Click Edit.
Check that the Country Code is correct (United Kingdom). Area code should be your local area code. If you need to dial 9 to get an outside line, or a prefix for cheaper calls, enter this in both the local and long distance boxes.
Click on Modems.
Your modem should be listed on this page. Normally you should not have more than one modem in here. Also, the modem listed should be a description of the modem you have installed. If you are having problems connecting, and the modem listed is different to the one you have, it may be worthwhile to contact your supplier and obtain updated modem drivers.
Click on Properties then Modem.
- Check that the Maximum Port Speed is higher than your modem's speed - if in doubt, select 115200.
- Wait for dial tone before dialing should NOT be checked.
Click on Diagnostics
- Click on Query Modem to confirm that your modem is working.
Click OK and OK again to close Phone and Modem options.
Has this page helped you solve your problem? Your feedback helps us to improve the help we provide.
Rate this page : 
Please note: We cannot reply to individual feedback through Rate My Page. If you need more help with a problem please use Contact Us.
People who read this article also found these useful:
Unable to get to your modem / router homepage
: General Information
: Planned Maintenance
